Furnace inducer motor replacement in San Jose, CA

Nur HVAC carried out a furnace repair for this home, replacing the unit’s failed inducer motor. The inducer motor had stopped doing its job, so our technician swapped it out to get the furnace running safely again.

The inducer motor is a small but essential part of a modern furnace, and when it fails the furnace usually will not fire at all. It runs briefly each time the furnace starts, clearing the combustion area and establishing draft before the burners light.

What our technician did

• Diagnosed the inducer motor: the technician identified the inducer motor as the failed component behind the furnace problem.
• Replaced the inducer motor: the old motor was removed and a new inducer motor was installed in its place.
• Restored safe operation: with the new motor fitted, the furnace was able to draw combustion gases and run as intended.

The inducer motor pulls combustion gases through the furnace and out the flue, and many furnaces rely on a pressure switch that confirms this draft before the burners will ignite. When the inducer motor fails, the furnace typically refuses to start, which makes a prompt replacement the fastest way to restore heat. Once the new motor was in place, the furnace was returned to safe, working order. Nur HVAC diagnoses the failed part before making a repair and confirms the system is operating correctly before leaving the job.